HiFi

Our selection of new home audio components including stylus, cartridge, and turntable accessories.

Category Title
Quick View
Grado

The newly redesigned Silver1 and Gold1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold1 model is selected from the Silver1 production run and meets higher test specifications. Approximately 5% of the production run meet these standards and become Gold1 models.


Technical Specifications



    Frequency Response: 10-60
    Principal: MI
    Channel Separation at 1KHz: 35
    Imput Load: 47K
    Output at 1KHz 5CM/sec.: 5mV
    Recommended Tracking Force: 1.5
    Stylus Type: E
    Inductance: 45mH
    Resistance: 475
    Compliance CUs: 20
    Stylus Replacement F=Factory: U
    Mounting: S/P
    Weight: 5.5
    Grado
    Quick View
    Audio Technica

    Replacement stylus compatible with the following Audio Technica cartridges (AT3600, AT3600L, AT3601, AT3651, AT3650L, AT3650C, AT3650, AT3626) and turntables (LP60, LP60USB, LP60BT)

    Specifications
    - Diameter: 0.6 mm
    - Type: Conical

    Audio Technica
    Quick View
    Grado

    Grado

    Prestige Red1 Cartridge

    New HiFi: $170.00 Buy

    Grado cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of cartridges are designed output and excellent stability under for high the most demanding conditions. All of the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

    Grado Red 1 Phono Cartridge Specifications
    - Type: Moving Iron
    - Output voltage: 5mV
    - Frequency response: 10Hz-55kHz
    - Load impedance: 47k ohms
    - Channel separation: 30dB
    - Stylus type: Elliptical
    - Stylus replacement: User replaceable
    - Compliance: 20mm/N
    - Tracking force: 1.0 - 2.0 g
    - Recommended tracking force: 1.5 g
    - Weight: 5.5 g

    Grado
    Quick View
    Audio Technica

    The Audio-Technica ATN3472SE ATN-3472SE needle stylus features a highly polished special elliptical diamond with a .0003 x .0007 inch scanning radii. It offers accurate tracing of stereo record grooves and results in superb fidelity and faithfulness to the original recording. The stylus is made in Japan by Audio-Technica.

    Audio Technica
    Quick View
    Grado

    Grado

    Prestige Red1 Stylus

    New HiFi: $100.00 Buy

    The Grado Red1 stylus is designed for the Grado Red1 phono cartridge and equivalent Grado phono cartridge models.

    The Grado Red1 stylus elevates the Grado Blue phono cartridge to the fidelity and sound quality of the Grado Red1 phono cartridge.

    Grado
    Quick View
    Audio Technica

    The elliptical diamond stylus is designed to track record grooves with high accuracy for outstanding audio reproduction. The ATN95E Elliptical Diamond is a replacement stylus for AT95E cartridge (also compatible with discontinued models AT93 and AT95) for the LP120 turntable.

    Audio Technica
    Quick View
    Grado

    Grado

    Prestige Black1 Stylus

    New HiFi: $50.00 Buy

    Replacement Stylus for Grado Black Cartridge / 3 piece OTL cantilever technology / Standard oxygen free wire / Specially designed elliptical diamond mount

    Grado
    Quick View
    Audio Technica

    The AT81CP allows owners of Technics, Hitachi, Pioneer and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer.

    Designed specifically for the linear format, the AT81CP features Audio-Technica’s unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

    Specifications
    • 0.6 mil conical stylus
    • Bonded round shank diamond
    • Carbon Fibre Reinforced ABS cantilever
    Audio Technica
    Quick View
    Grado

    Grado

    Prestige Green1 Stylus

    New HiFi: $60.00 Buy

    The Grado Green stylus is designed for the Grado Green phono cartridge and equivalent Grado phono cartridge models.

    The Grado Green stylus elevates the Grado Black1 phono cartridge to the fidelity and sound quality of the Grado Green phono cartridge.

    Grado
    Quick View
    Audio Technica

    Audio Technica

    AT615a Level

    New HiFi: $29.99 Buy

    The AT615a high-precision bubble level is an indispensable tool for making horizontal adjustments during turntable setup. Features a machined aluminum housing.

    Features:

    • High-precision bubble level
    • Machined aluminum housing
    • Suitable for setting up turntables

    Specifications:

    • Diameter: 37 mm (1.5")
    • Height: 17 mm (0.7")
    Audio Technica
    Quick View
    Grado

    Grado

    Prestige Blue1 Stylus

    New HiFi: $80.00 Buy

    The Grado Blue1 stylus is designed for the Grado Blue phono cartridge and equivalent Grado phono cartridge models.

    Grado
    Quick View
    Audio Technica

    This universal 1/2 inch-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.

    Features:

    • All metal construction with integral finger lift
    • Rubber washer for secure fit to tone arm
    • Color coded lead wires and cartridge mounting hardware
    • Fits the AT-LP120-USB, AT-LP240-USB, AT-LP1240-USB, and AT-LP5 Direct-Drive Turntables

    Specifications:

    • 1.6 ounces

    Winner of numerous industry awards, Audio-Technica manufactures products that set quality, durability and price/performance standards for live sound tours, broadcast and recording studios, corporate and government facilities, house-of-worship venues, and more. A-T microphones are chosen for critical government installations and are also selected for major broadcast music events, including the Grammy Awards and the Rock & Roll Hall of Fame induction ceremonies.

    Audio Technica
    Quick View
    Grado

    Grado

    Prestige Gold1 Stylus

    New HiFi: $150.00 Buy

    The Grado Gold stylus is designed for the Grado Gold phono cartridge and equivalent Grado phono cartridge models.

    The Grado Gold1 stylus elevates the Grado Silver phono cartridge to the fidelity and sound quality of the Grado Gold1 phono cartridge.

    Grado
    Quick View
    Audio Technica

    The AT618a disc stabilizer fits over the turntable spindle to hold records firmly in place, reducing resonance and improving sound quality. The stabilizer is constructed of machined brass with a protective rubber cover.

    Features:

    • Holds record firmly in place for reduced resonance and improved sound quality
    • Machined brass housing with protective rubber cover
    • Weight: 600 g (21.2 oz)
    Audio Technica
    Quick View
    Grado

    Grado

    Prestige Silver1 Stylus

    New HiFi: $130.00 Buy

    The Grado Silver 1 stylus is designed for the Grado Silver phono cartridge and equivalent Grado phono cartridge models.

    The Grado Gold1 stylus (shown in the Related Products) elevates the Grado Silver phono cartridge to the fidelity and sound quality of the Grado Gold phono cartridge.

    Grado
    Quick View
    Grado

    The newly redesigned Black and Green have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Black1 and Green1 models use a three-piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing. The Green1 model is selected from the Black1 production run and meets higher test specifications. Approximately 15% of the production run will meet these standards and become Green1 models.

    Technical Specifications

    • Frequency Response: 10-50
    • Principal: MI
    • Channel Separation at 1KHz: 30
    • Imput Load: 47K
    • Output at 1KHz 5CM/sec.: 5mV
    • Recommended Tracking Force: 1.5
    • Stylus Type: E
    • Inductance: 45mH
    • Resistance: 475
    • Compliance CUs: 20
    • Stylus Replacement F=Factory: U
    • Mounting: S/P
    • Weight: 5.5

    Grado
    Quick View
    Grado

    The newly redesigned Black and Green have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Black1 and Green1 models use a three-piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing. The Green1 model is selected from the Black1 production run and meets higher test specifications. Approximately 15% of the production run will meet these standards and become Green1 models.

    Technical Specifications

    • Frequency Response: 10-50
    • Principal: MI
    • Channel Separation at 1KHz: 30
    • Imput Load: 47K
    • Output at 1KHz 5CM/sec.: 5mV
    • Recommended Tracking Force: 1.5
    • Stylus Type: E
    • Inductance: 45mH
    • Resistance: 475
    • Compliance CUs: 20
    • Stylus Replacement F=Factory: U
    • Mounting: S/P
    • Weight: 5.5

    Grado
    Quick View
    Grado

    The newly redesigned Black and Green have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Black1 and Green1 models use a three-piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing. The Green1 model is selected from the Black1 production run and meets higher test specifications. Approximately 15% of the production run will meet these standards and become Green1 models.

    Technical Specifications

    • Frequency Response: 10-50
    • Principal: MI
    • Channel Separation at 1KHz: 30
    • Imput Load: 47K
    • Output at 1KHz 5CM/sec.: 5mV
    • Recommended Tracking Force: 1.5
    • Stylus Type: E
    • Inductance: 45mH
    • Resistance: 475
    • Compliance CUs: 20
    • Stylus Replacement F=Factory: U
    • Mounting: S/P
    • Weight: 5.5

    Grado
    Quick View
    Grado

    The newly redesigned Black and Green have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Black1 and Green1 models use a three-piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing. The Green1 model is selected from the Black1 production run and meets higher test specifications. Approximately 15% of the production run will meet these standards and become Green1 models.

    Technical Specifications

    • Frequency Response: 10-50
    • Principal: MI
    • Channel Separation at 1KHz: 30
    • Imput Load: 47K
    • Output at 1KHz 5CM/sec.: 5mV
    • Recommended Tracking Force: 1.5
    • Stylus Type: E
    • Inductance: 45mH
    • Resistance: 475
    • Compliance CUs: 20
    • Stylus Replacement F=Factory: U
    • Mounting: S/P
    • Weight: 5.5

    Grado
    Quick View
    Grado

    Grado

    Prestige Blue1 Cartridge

    New HiFi: $125.00 Buy

    Grado phono cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of cartridges are designed for high output and excellent stability under the most demanding conditions. All of the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

    Grado Blue 1 Phono Cartridge Specifications
    - Type: Moving Iron
    - Output voltage: 5mV
    - Frequency response: 10Hz-55kHz
    - Load impedance: 47k ohms
    - Stylus type: Elliptical
    - Stylus replacement: User replaceable
    - Compliance: 20mm/N
    - Tracking force: 1.0 - 2.0 g
    - Recommended tracking force: 1.5 g
    - Weight: 5.5 g

    Grado
    Quick View
    Grado

    Grado phono cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of cartridges are designed for high output and excellent stability under the most demanding conditions. All of the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

    Grado Blue 1 Phono Cartridge Specifications
    - Type: Moving Iron
    - Output voltage: 5mV
    - Frequency response: 10Hz-55kHz
    - Load impedance: 47k ohms
    - Stylus type: Elliptical
    - Stylus replacement: User replaceable
    - Compliance: 20mm/N
    - Tracking force: 1.0 - 2.0 g
    - Recommended tracking force: 1.5 g
    - Weight: 5.5 g

    Grado
    Quick View
    Grado

    The newly redesigned Silver1 and Gold1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold1 model is selected from the Silver1 production run and meets higher test specifications. Approximately 5% of the production run meet these standards and become Gold1 models.


    Technical Specifications



      Frequency Response: 10-60
      Principal: MI
      Channel Separation at 1KHz: 35
      Imput Load: 47K
      Output at 1KHz 5CM/sec.: 5mV
      Recommended Tracking Force: 1.5
      Stylus Type: E
      Inductance: 45mH
      Resistance: 475
      Compliance CUs: 20
      Stylus Replacement F=Factory: U
      Mounting: S/P
      Weight: 5.5
      Grado
      Quick View
      Grado

      The newly redesigned Silver1 and Gold1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold1 model is selected from the Silver1 production run and meets higher test specifications. Approximately 5% of the production run meet these standards and become Gold1 models.


      Technical Specifications



        Frequency Response: 10-60
        Principal: MI
        Channel Separation at 1KHz: 35
        Imput Load: 47K
        Output at 1KHz 5CM/sec.: 5mV
        Recommended Tracking Force: 1.5
        Stylus Type: E
        Inductance: 45mH
        Resistance: 475
        Compliance CUs: 20
        Stylus Replacement F=Factory: U
        Mounting: S/P
        Weight: 5.5
        Grado