The newly redesigned Silver1 and Gold1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold1 model is selected from the Silver1 production run and meets higher test specifications. Approximately 5% of the production run meet these standards and become Gold1 models.


Technical Specifications



    Frequency Response: 10-60
    Principal: MI
    Channel Separation at 1KHz: 35
    Imput Load: 47K
    Output at 1KHz 5CM/sec.: 5mV
    Recommended Tracking Force: 1.5
    Stylus Type: E
    Inductance: 45mH
    Resistance: 475
    Compliance CUs: 20
    Stylus Replacement F=Factory: U
    Mounting: S/P
    Weight: 5.5

    The newly redesigned Silver1 and Gold1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold1 model is selected from the Silver1 production run and meets higher test specifications. Approximately 5% of the production run meet these standards and become Gold1 models.


    Technical Specifications



      Frequency Response: 10-60
      Principal: MI
      Channel Separation at 1KHz: 35
      Imput Load: 47K
      Output at 1KHz 5CM/sec.: 5mV
      Recommended Tracking Force: 1.5
      Stylus Type: E
      Inductance: 45mH
      Resistance: 475
      Compliance CUs: 20
      Stylus Replacement F=Factory: U
      Mounting: S/P
      Weight: 5.5
      Prestige Silver1 Cartridge

      Details

      Format: HiFi

      Prestige Silver1 Cartridge
      Artist: Grado
      Format: HiFi
      New: Available In-Store 225.00
      Wish

      Available Formats and Editions

      Details:

      The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing.

      More Info:

      The newly redesigned Silver1 and Gold1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold1 model is selected from the Silver1 production run and meets higher test specifications. Approximately 5% of the production run meet these standards and become Gold1 models.


      Technical Specifications



        Frequency Response: 10-60
        Principal: MI
        Channel Separation at 1KHz: 35
        Imput Load: 47K
        Output at 1KHz 5CM/sec.: 5mV
        Recommended Tracking Force: 1.5
        Stylus Type: E
        Inductance: 45mH
        Resistance: 475
        Compliance CUs: 20
        Stylus Replacement F=Factory: U
        Mounting: S/P
        Weight: 5.5